FLASHING TUTORIAL FOR SC6531 DUAL-IC

FLASHING TUTORIAL FOR SC6531 DUAL-IC

Please Follow these Instructions (To solve your problem)

(For safety purpose i am telling to do with 2.3.9 version, otherwise i'll advice you to use any version)

THIS TUTORIAL IS FOR SC6531 DUAL-IC

STEP I

Connect Handset and Direct Read Flash File with VolcanoTool 2.3.9 version.

STEP II

(Check the size of Readed file)

If the size of readed file is 8mb, then
Set the 'FLASH SIZE' Manually to 8mb and Read File again.(You'll get 16mb file now)

OR

If the size of readed file is 16mb, then
Set the 'FLASH SIZE' Manually to 16mb and Read File again.(You'll get 32mb file now)

OR

If the size of readed file is 32mb, then
Set the 'FLASH SIZE' Manually to 32mb and Read File again.(You'll get 64mb file now)


STEP III

The File you readed is perfect one.Check This Post for Further Operations -

>> DUAL-IC OPERATIONS <<


YOUR PROBLEM WILL GET SOLVED