Walton Primo how to update From 2.3 to ICS 4.0
how to flash Walton Primo
Driver installation1) Install AP part driver
Power off handset, press “Power key + Voice Up key” until the screen shows green, plug in usb cable, PC will remind you of installing new hardware. Unzip “ Driver”, select adb driver file, install AP driver.
Path: Right click on My computer>Manage>Device manager>Android(Yellow notification)>Update driver software>browse path> select adb folder >Continue anyway>finish
When you install AP driver successfully, you will find “Fastboot interface” in device manager. As below
2) Install BP part driver
(1) Power on handset, plug in 5Pin USB cable, Unzip “Driver”, select HK11-VB717-27_1.0.56 driver file,
install BP driver.
Path: Right click on My computer>Manage>Device manager>Tiyanyu HS-USB Driver (Yellow
notification)>Update driver software>browse path> HK11-VB717-27_1.0.56\Win32\x86\free >Continue
anyway>finish.
When your BP driver is installed successfully, you will find one modem and two ports in device
manager. As below:
Open PrimoDownload tool, set your handset into BP mode (Power key+ Voice down key) and connect your
phone with USB cable.
1. Click set path>Browse folder>Select Primo ICS Software_BP part.
2. Click Check Port
3. Click Download All
AP Download:
Open PrimoFlash tool, set your handset into AP mode (Power key+ Voice up key) and connect your phone with USB cable.
1. Click Set path>Browse folder>Select Primo ICS Software_AP part.
2. Click Ok for Start download.
Note: If your antivirus detects Primo Flash Tool as virus, disable your antivirus till software is finish.
All in one
No comments:
Post a Comment