S7582 Firmwares:
Android 4.2.2:
- S7582DDUANB4 / ODDANB3 India
- S7582XXUAMK3 / OXXAMK2 SEE South East
Europe
- S7582XXUAMK3 / OXXAMK2 XEH Hungary
- S7582XXUAMK3 / OJVAMJ2 EGY Egypt
- S7582XXUAMK3 / OJVAMJ2 KSA Saudi Arabia
- S7582XXUAMK3 / OJVAMJ2 XSG United Arab Emirates
- S7582XXUAMK3 / ODDAMK1 India
- S7582XXUAMK3 / OLBAMK2 Southeast Asia
- S7582XXUAMK3 / ATOAML1 Austria
- S7582XXUAMK3 / OXXAML1 EUR Greece
- S7582XXUAMK3 / OXXAML1 ROM Romania
- S7582XXUAML5 / OLBAML3 Southeast Asia
- S7582XXUANA1 / ODDAMK1 India
- S7582XXUANA2 / OXAANA1 TPH Portugal
- S7582XXUANA2 / OXXANA1 DBT Germany
- S7582XXUANA2 / OXXANA1 SEB Baltic
- S7582XXUANA2 / OXXANA1 SEE South East
Europe
- S7582XXUANA2 / OXXANA1 EUR Greece
- S7582XXUANA2 / OXXANA1 ROM Romania
- S7582XXUANA2 / ATOANA1 Austria
- S7582XXUANA3 / OLBANA1 Southeast Asia
- S7582XXUANA3 / OJVANB1 EGY Egypt
- S7582XXUANA3 / OJVANB1 KSA Saudi Arabia
\
Turn off the device, And take out its battery, SIM and memory cards.
- Run Odin3.exe program.
- Check these options: Re-Partition (If you have PIT file
only), Auto Reboot, F.Reset Time.
- Click PIT button to select: kyleprods.pit
- Firmware files selection:
Click Bootloader button to select: BOOT_S7582xxxxxxx_REV00.tar.md5
Click PDA button to select: CODE_S7582xxxxxxx_2099582_REV00_user_low_ship.tar. md5
Click Phone button to select: MODEM_S7582xxxxxxx_REV00.tar.md5
Click CSC button to select: CSC_Oxx_S7582xxxxxxx_2099582_REV00_user_low_ship.t ar.md5
- Entering the Download Mode:
Put the battery back into your device, Press and Hold Volume Down key + Home key + Power, After you get the warning message release all keys and press Volume Up key.
- Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.
Click Bootloader button to select: BOOT_S7582xxxxxxx_REV00.tar.md5
Click PDA button to select: CODE_S7582xxxxxxx_2099582_REV00_user_low_ship.tar. md5
Click Phone button to select: MODEM_S7582xxxxxxx_REV00.tar.md5
Click CSC button to select: CSC_Oxx_S7582xxxxxxx_2099582_REV00_user_low_ship.t ar.md5
- Entering the Download Mode:
Put the battery back into your device, Press and Hold Volume Down key + Home key + Power, After you get the warning message release all keys and press Volume Up key.
- Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.
- Wait until Windows detects the connected device and
installs its suitable USB drivers.
- In case everything is OK, Then Odin program will detect
your connected device (0:[COMxx]).
- Click on Start button.
- Odin program will start installing the new firmware files
into your device, So wait until the device reboots.
- If the update was successfully done, Then you will notice PASS!
Word at Odin program.
- Disconnect the USB cable.
0 comments:
Post a Comment